They are 1 1/16 bore, 3 inch stroke, I believe the rod is 5/16 possibly 3/8. I did look for a extrusion that I could stack on top of the existing one...
I'm not getting any defection of the miter gauge but more of the bracket that I made and the rod of the cylinders. This shaper came with a cam clamp...
Ok I have an update on this I came up with a different hold down but it has its own issues. There is too much deflection in the cylinder rod to hold...
I understand it is a regional issue. There are several 500k and up houses on these bulffs most are on about 2-3 acres. The houses you see in the town...
I got the hinge mortiser and the weatherstripping grover. Now I just have to figure out how to use them. The manuals could be a little more detailed....
In case your plastic cover doesn't work i would suggest an annular cutter in a mag drill that is by far the best way I have found to cut big holes in...
I'm thinking the route that will be best for me is to get 2 coping discs and still use the standard freeborn cutters. I called and talked to a guy at...
Find latest posts
View Articles
View Blog Entries