I work on and replace lots of sliding patio doors. The ones with stainless steel tracks hold up much better than those with aluminum tracks. Several...
The feature of walking around inside some buildings has either gone away or I am not up to speed on the latest version. Google Earth is an excellent...
I have used some beautiful wood from Hibdon Hardwoods in St. Louis MO. 25 years ago you could buy beautiful big boards there by the board foot. They...
You should be able to re-saw your instrument wood when you get that the way you want it.
I just had a disappointing failure with my Delta 14 that is...
I try to avoid putting a screw in the lock. A screw hole in the lock creates a problem in the future. Occasionally a joint is problematic and I will...
I have had cases where it only took an eighth of a turn on the lugs to correct a finicky breaker. Also check for aluminum wire which can create this...
I have one of those antique razor blade planes. If I do not find it soon I am going to order the modern version that uses a single edge utility razor...
I have heard from several sources that woodworking tools are the most dangerous industrial machines, because of razor sharp blades traveling at very...
You may have some lingering stripper and old finish residues. I use a fairly strong solution of TSP (not TSP substitute) or denatured alcohol for the...
I avoid pesticides but do use Borax products as a last resort. We have an invasion of tiny ants for a few weeks most springs. I put out Terro liquid...