I try to avoid putting a screw in the lock. A screw hole in the lock creates a problem in the future. Occasionally a joint is problematic and I will...
I have had cases where it only took an eighth of a turn on the lugs to correct a finicky breaker. Also check for aluminum wire which can create this...
I have one of those antique razor blade planes. If I do not find it soon I am going to order the modern version that uses a single edge utility razor...
I have heard from several sources that woodworking tools are the most dangerous industrial machines, because of razor sharp blades traveling at very...
You may have some lingering stripper and old finish residues. I use a fairly strong solution of TSP (not TSP substitute) or denatured alcohol for the...
I avoid pesticides but do use Borax products as a last resort. We have an invasion of tiny ants for a few weeks most springs. I put out Terro liquid...
I was taught to replace everything when doing maintenance on chain drives that are worn. On AG equipment and bicycles etc., the chains and sprockets...
The day before the ferry ride we had visited the workshop of a charming 80+ year old man who was still building traditional guide boats. You are in a...
Using a bandsaw or jigsaw would be safer. Cutting to a line freehand on the table saw is generally considered a no no. It can be done if the curve is...