Michael Schuch
Contributor

Yes, that is what I was referring to. The big box that says do not turn this wheel. I agree that it appears to be a good place to mount the VFD. ...

So the seller is betting that you will miss any single payment in the next 2 years or not be able to finance it in under two years from now and they...

Another possibility to consider: ...

GREAT JOB!!!! I sympathize with the ton of effort and extraordinary patients all of that took! Please let us know how it all plays out. Please...

The Hitachi WJ VFD's are considered a premium VFD. I have a couple and they are the only ones that would not work directly out of the box without...

I picked up a brand new (never used) Porter Cable 7539 3hp plunge router with a Router Raizer installed and the original router plunge springs loose...

A lot of my routers are old to quite old. When I initially seat a bit in the collet I always make sure to pull it up an 1/8" or so before tightening...

I think your best option is to pay the ransom at the dealer and get a new fob from them.

What kind of car is it and how old is it? Some fobs can be easily replaced and some are just darned expensive. What ever you do stay away from...

For me it depends on the particular wood, the particular joint, the type of glue and how much stress the joint will be under. For a joint that will...

I would love to see a picture of your old jointer! I love old iron too. I also post on OWWM but it isn't nearly as friendly of a forum as it is...

For grain raised by paint I would just sand it before putting the next coat on. To patch and fill voids I prefer good old Bondo. It cures in 10...

Spar varnish is generally used on boats where there is a lot of sun exposure. It will add a yellow tint to your white paint though.

I would answer... because the hole they are covering is round! ;)

Annular cutters are perfect for such projects! https://www.amazon.com/Annular-Cutters/b?ie=UTF8&node=340028011 You can usually pick up odd...

The attic of my house makes a good kiln for drying wood. Put the wood up there with a fan and it dries pretty quickly.

The fence on my Redstar RAS is similar. Instead of a piece of aluminum extrusion backing the fence I just have a jointed and planed 2x6 screwed...

Thank you! The pictures don't really do the Redstar justice. In person the Redstar is decently bigger and beefier than the Delta but the Redstar...

I would love a review of it when you get a chance to set it up. May I ask what the winning bid was?

I completely agree. I grew up learning woodworking on my fathers Delta 10" turret arm saw. My first radial arm saw (and first stationary saw) was a...

As a software engineer I can completely respect that! :)

Would a fan blade mounted on a 3phase induction motor qualify as explosion proof? Or even better, a would TEFC (Totally Enclosed Fan Cooled) 3ph...

30 years ago I built the base for my 15" planer with 4" locking casters. In that 30 years I don't believe the casters have been locked once. The...

Very good info too, thank you!

I have shyed away from upgrading to a Shelix head because of some of the complaints simular to what you described. It is nice to know that you have...

When I am working in new territory I do way too much thinking and not enough doing. I like to have everything mapped out in my head before I put...

Right next to the pipe from your bedroom going to the toilet bowl in the bathroom?

I have to rebuild my back deck, it is way over due. I am seriously considering mounting some angle iron on the stringers to use as rails for...

My Internet connection struggles are pretty irrelevant. The point I was trying to make is that as long as you stay in their system, the system they...

Teen years are TOUGH! My daughter had VERY difficult middle school years. She was VERY withdrawn. I started with her family doctor who got us in...