Scott Clausen
Contributor

Good deal! I was eyeballing that class, looks fun. I took the window sash class over Memorial day.

Thank you for the review, well done.

I like that you include some history with plane you are offering. Very nice restoration.

It would help to know what they are asking for each. Pictures would help too. Best advise I can offer is to sample some similar planes that have...

I have a 16' x 10' I got rid of a chop saw & jointer to have enough room to move. Based on that I think with two benches and a jointer along with all...

I have a pancake that I hate. It leaks, noisy and too cheap to fix so I don't even bother to drain. Looking to upgrade to a nice quiet one that can...

Even though I suffer from ODO (OrderDisOrder) I have run out of room for more planes. Nice job on that one.

I guess I enjoy the journey more than the finish line. I like the fact that I don't need eye, hearing, breathing or ear protection. I also like the...

My kitchen table that I have had for 40 years is somewhat square with an oak top and possible maple breadboarded around the perimeter and large...

For me I struggled with the moving the piece of wood method. After someone else showed me a 123 block with a dial indicator bolted into it that they...

It used to be that a lot of thought went into placing items that people run in and out to get in the back of the store. The idea was to hope other...

If never painted I would cover the floor. Wet the ceiling with a pump sprayer a section at a time and scrape it off. Roll all of it up in black trash...

If you don't need to borrow the money it may get better as interest rates rise. Maybe by then materials will normalize. I would wire and install...

I found a stand, the kind with the splayed leg from an old craftsman, on my way home from a run. I added some ply to the top and put a ply cart under...

You can't argue with that logic Derek, very nice work there!

Sounds like a great guy, he predates my entrance into woodworking for the most part. Sounds like I need to put some his stuff on my book and video...

I often think machine tool set up and sneaking up on a fit requires a lot of time.

I say pick a quality tool platform, voltage and standardize on it. Who needs a bank of different chargers and batteries to go with them.

My brain wants to see horizontal on the drawer fronts, I have no idea why but it looks better to me.