Scott Clausen
Contributor

Most coatings that go over concrete require de-greasing and etching for a good bond. Industrial coatings for garages are the thing now, might want to...

I would think the damper would block air from entering the humidifier compartment. Never had one so its my best guess.

I rest, not slam down on the sole. Bench is wood and so is the plank I will drive the blade across hundreds of times. I can hit metal tools...

I am 60 and eyeing and looking forward to retirement. I am also eyeing a 1100 point dip in the Dow so owning my own company the date is a moving...

I can't imagine a painter removing that much detail, ouch! A new molding is not quite the same. If the window sweats it will eventually destroy the...

Get some more cherry and use it on the doors and drawer fronts where contrast looks like it was intentional. I am ignorant as to how, but I have...

Think of a shooting board as a way to true up the end of stock by thousands of an inch. The overall length shouldn't change much unless you are way...

There is a bit of a learning curve to bending conduit but probably some YouTube viewing can help. MC is a little harder to make look "neat" on the...

I finished my all hand tool window sash build. A neighbor had a replacement window in a historic house that had rotted. I looked at it and said "I...

Let it dry a bit before cutting to size. Make your project and let it air dry in place for a few months and be ready to paint. Forcing it to dry fast...

If doing that many dados by hand you may want to find a source for some spare knickers.