Holmes Anderson
Contributor

I think the problem that the OP describes may be that the upright squared wings of the points stick out of the glazing fillet because of the depth of...

I assume the screen frames will not be supported on the sides by the framing of the building because otherwise this wouldn't be a problem. 2x screen...

Yes, if the box slides smoothly and the slides don't have fine adjustment features then just shim the false front. You may regret using brads. Screws...

Maybe not directly related to the subject but what are the options for moving machines through a standard passageway door opening and over rough...

If I were you, I would borrow or rent a timber framing circular saw and make the cut in a single pass. Then clean it up with sandpaper or handplane....

There are variations in the length and width of box springs and mattresses, both between manufacturers and models and even because of manufacturing...

At the risk of stirring the pot, why the obsession with high-end combo and rip blades? I understand the need for a high quality laminate blade...

As Patrick Kane points out, the difference between a 15" planer and a 20" planer is more than just 5" of width. Pressure bars and segmented rollers...