Jeff Roltgen
Contributor

Masking tape. So many ways it helps me. Aligning and seaming veneers, clamping, even to gang up pieces for end-milling at the shapers - the end is...

LOL - missed that!

Brian, In my experience, as well as self-educating through books and publications, the general consensus is that powdered dyes are not as...

I agree with John. I too, in my early WW days, thought it a complete travesty to stain walnut. A friend displayed an accent chair in the atrium of...

Definitely needs to be sanded back to level. Use a block of wood to assure it stays level. Sounds like you know you went a bit too fast. With...

Could you elaborate? What is ruined? jeff

Indeed, a wonderfully inspiring craftsman. I have several of his books and of course, articles from various magazines over the years. Yes, 63 is...

+1 on Jim's suggestion. I believe they simply categorize it as "non-delivery of product". Also, despite the fact that you see reviews all over...

I'm on something like year 8 on my Jet JDP-17. - No need to build a supplemental table - ZC insert and slots are in place - Lighting systems still...

I've got an older one, and despite the age, that fine-tune depth adjustor still is fluid smooth, yet holds it's position. There is an O-ring stuffed...

So glad we had this little talk. Short term solution: 1> Yes, the newer guide frame assembly # 202.470, is what the factory service would use to...

Robyn, That is a good question - probably one for Festool, but they certainly have an allergy to anyone fixing their tools but them. Still, may...

Perhaps this is a good time to hijack my own thread and steer it this way: DF500 replacement for a veteran user, or, might I be happier going for...

That is correct, Patrick. Regular wear would not do that. Think impact (s). :eek: No tool is completely immune to gravity, sadly. Michael, I...