Allen Mattsen
Contributor

What are your thoughts on bottom bowl gouges, specifically if your bowl size limit is 16"? I noticed Thompson is sold out of them and watched an...

Thoughts on the D-Way bowl gouge, U shaped, fingernail grind vs Thompson V shaped, fingernail grind bowl gouge? I like the D-way handles and...

Those on the left look ideal toward what I'm looking for (or make). What degree is the grind on those on the left? The ones on the right look new to...

I'm slowly working through your collection of videos and had watched a few before seeing this post. Tons of good info! I have a Laguna 12/16 Midi...

Do the EW tools come stock with negative rake cutters, only certain ones, or do you have to buy those specific carbide inserts separately?

Why do some use Naptha or other solvent choices when mixing up batches of oil-based poly?

Thank you!

John, could you explain why the Hunter tools are better (for lack of a better term)? Is it because they use a negative rake type angle? I'm...

Oh nice, didn't realize you had the same lathe. Once again, I appreciate the support for you (and all the contributors).

2 1/8 seems ideal, thanks. The reason I asked about multiple bits is if people typically use a smaller one first then the full sized (2 1/8) or just...

Would this be a decent starting point for a chuck to use in tailstock for forstner and other bit drilling procedures? Is there anything about buying...

I forgot to ask: the 8" tool rest that came stock with my lathe seems like something I'll want to upgrade. Any suggestions It's a 1" (24.5mm) post....

Lots of good info here. I did begin making a handle yesterday and really like the idea of being able to change tools. This first one will likely buy...

I know I want to upgrade two tools already and add some. Spindle gouge - some have complained about the thompson grind - why? can I or should I...

What are folks using for setup jigs, blocks, etc? Are there any that are indispensable? The Raptor jigs or Battie angle gauge? I think I'm going...

If you don't mind I have a couple questions about this list and other tools. I am also new to the craft. Will the Hunter tools be well suited to...

I found the Nova G3 Pro-Tek "Bundle" for close to the same price as the standard set - and keep in mind there is a newer version out labeled 'Nova G3...

Awesome, thanks. Yes, I will definitely move to Thompson, et al premium tool steel(s) once I get more experience and learn what to focus my attention...

Lots of great information guys. Know it's appreciated.

I understand the Wolverine system takes up extra space vs the Woodcut/Tru-Grind system. Are there drawbacks to the Woodcut system somehow, other than...

I've only seen the standard 'chefs steel' style rod Burnishers for scrapers. Aren't they supposed to be just a hardened rod? Could use more info on...

This all makes sense, thank you. I've seen the forstner Bits that hook or snap into a tailstock live center piece, what is that system called -...

That reminds me, any recommendations on a Jacob's chuck or whatever to hold bits in the tail stock?

Oh I started all right, heh. Pretty sure I've worn out most edges in the set. Planing cuts w/ skew chisels are tricky. Had to watch some video to...

In all their glory, the starter set. Took the load of lacquer off them and let me say: I'm anxious for the sharpening tools I ordered to arrive. 😎

Good stuff! I'm developing a plan to acquire blanks. There are a lot of suppliers in my area because it seems there are A LOT of woodworkers in...

Melvin, thank you for sharing. That is a wealth of information! Because I am 50 and retired now (and not early do to selling a .com, either, lol, but...

Well, given the fact my sharpening tools are delayed, perhaps I can whiddle this down some more and put a finer point on which specific tools to...

Update: I went ahead and ordered the 1HP Rikon grinder and 180/600 mega square wheels from Ken. Big bullet to bite, but I feel good about the...