Eric Arnsdorff
Contributor

This is terrific! Thanks Keith for providing this forum! Thanks for the terrific information and help it has provided!

Thanks for the rifle case suggestions! I had thought I should get my rifle case out and see if something like that may work but hadn't done it. ...

They hang nicely and I’ll make a French clear to hold the rods and Allen wrench. I don’t have bags for my rails but maybe a short rail bag would...

I bought the trimmer you linked to from Rockler. It appears a number of people carry the exact same one. Maybe there really is only one. I’m not...

Great to hear you’re happy with the sander! My wife bought the 150/5 for me for Christmas and I was astounded how much better sander it is. I...

Thanks Jim!!! This is perfect - easy and cheap! This is identical to the construction on my bandsaw. As built my bandsaw rains dust on me and...

Mine are mounted permanently but they are on pieces of plywood that is screwed down to my top and I have moved them from my original setup with it. ...

Thanks John! I just received a large roll of paper for my 22/44 drum sander from them and I'll look there to get some sleeves. Last night I waxed...

Thanks Jim for showing that! Although I'm still not sure if the model I have needs that. But certainly, as I begin to use it and if I find that...

Both of you are correct but with a little additional information. The only time the two diagonals are exactly equal is when the corners are...

The confirmation is reassuring! @Rick - looking at it makes me think it is fairly well sealed for dust collection. What are you thinking is...

Thanks for the feedback. It sounds like going with the floor model would be a good move. Based on your feedback I just went ahead with the...

I started with the Rockler sled and it works well. I subsequently bought the Infinity sled from the SMC classifieds. The Infinity sled is a better...