I was thinking to myself, as I used this jointing shooting board this past weekend, that the planing was effortless. Just wax, a well-fitted support...
Recently I decided to experiment with strops. For some years I have been using Veritas green compound on planed hardwood or MDF. It has worked pretty...
Tim, even the best new chisels arrive as a kit. In addition to preparing the primary bevel and then sharpening the edge, you also need to ensure that...
I hate to get rid of these beauties. I have an 8 piece set of brand new Blue Spruce paring chisels. I have honed them and have only lightly used one...
I hate to get rid of these beauties. I have an 8 piece set of brand new Blue Spruce paring chisels. I have honed them and have only lightly used one...
If the epoxy is dry and hard, it will chip out if you run a scraper over it. In this case, use a sanding block with coarse grit, followed by a medium...
Note in this photo, the inside faces of the chisel are honed by a diamond cone. This takes a minute to do. As with sharpening any blade, the process...