Tim, my bench stands about 8-12” away from the wall. The European Oak bench top is 21” wide and 3 1/2” thick. The base is reclaimed Jarrah. Solid and...
Tim, if you are planing this to be primarily a hand tool bench, and working principally from one side, then 30" is too wide ... unless you are 9 foot...
Dan, I have a Custom #7 with a 40-degree frog. This is wonderful for both face- and edge grain, and can even shoot end grain. While it works well, 40...
Jon, the benefit from the JessEm is not just to avoid kickback, but also to improve the quality of a rip cut by minimising the movement of the board...