Jason, if you keep strictly to the 1/3 Rule, then you need a range of sizes. 5/16” might be closer to the ideal in a 1 1/2” leg. However, with wider...
Ivan, I would guess that it chipped as it is quite sharp. If it was mine, I would grind it back with a 50 degree leading edge angle. Now you will be...
That looks great, Mike. I'm guessing that the Cherry will darken and the Walnut lighten over time ... perhaps come to look much the same and lose the...
Thomas, my preference would be the Veritas Small Plow. You will need to add the T&G kit to it. If the cost is a factor - and I have no idea of this -...
I have a 10.8v (Festool C12), which is rated 12v in the USA. I think that this has 1.5 ah batteries. This is perfect for a workshop, for drilling and...
CBN is safe to grind all steel, except mild steel or unhardened/annealed steel. If the grit does become clogged (by grinding these soft metals), then...