Ron Selzer
Contributor

I have a Berol less than a foot from the computer and another one down in the shop Ron

Very nice work! Not what I want in my house, however I could look at it and study it for at least an hour if I had the opportunity to do so. Ron

Scraped a couple of those 8" saws twenty years or so ago. Could not give them away. Dad inherited them in the 60's Ron

these are shop cabinets. As far as quality goes, I don't care too much. I thought it would be nice just to have a front to cover the slides/ Slides...

Don't know where you live or where you are building this building. HERE in Central Ohio some/all of the newer posts rot off at ground level in 20-30...

wash the surface with alcohol, let dry then apply the label. Ron

I have learned over the years that a lot of tools loaned out don't come back especially if not returned in a month. The number of people I loan tools...

Foam backing rod with 1/8" of white Silicone caulking. Ron

Personally I prefer horsepower. I use a higher horsepower router than others I know for the same job. I firmly believe that a higher horsepower...

As long as the correct breaker is used for the gauge of wire, the branch circuit is protected. Whatever that is wired/plugged into the circuit may...

Alan stated that the solar disconnects when Utility Co. power is lost. Also he has several disconnects already. Now it would be possible to install...

I would go with this one UNLESS you want a 10 1/4" saw, an 8 1/4 saw will cut more than 3" and cost about half of the 10 1/4" saw. Can aways buy...

They are called transfer switches commonly used with generators. If your system automatically drops out, sure seems like it could be stand alone....

John The newer 7730,7770 had a saber saw attachment, drum sander along with the molding/planer head guard. there was a drill chuck and I believe a...

my shop is full to overflowing getting hard to move around, now taking over most of the rest of the basement for wood storage and may start doing...

Sat on the deck and talked to the neighbors while it happened. Got dark enough the street lights came on, did cool off fast for a little bit. Amazing...

drawer front is too light, needs reinforced somehow. lot of good ideas given already pick one. I have a 4 drawer chest for my clothes, made out of...

Got out of Rehabilitation on Friday 4/5, straight to Surgeon's office for check of the stump, said 2 weeks and staples out. Prothetics rep was there...

Mike please report back if you change the rack. I have the same drill press. Ron

Make it a point to have my wife talk to the family auctioneer every time we pick up something from one of his online auctions. She has been told and...

Derek Has been very interesting following along with this chair build. I have no desire to build one, however I have seen some things done that...

"Taxes are just over $8K " And I am complaining about $2.4k on my house appraised 2 yrs ago at $250k

Some years back I made a concerned effort to hook all portable tools in the shop up to dust collection. All started due to using a router and then...