Ron Selzer
Contributor

photo eye or force adjustment holding the button down is an override of the safety circuit, making you the safety circuit mine does this when it is...

Our tile came from Italy and I hear container shipping costs are up 300% from 2 years ago. It also took the tile 3 months to get here Grizzly sent...

Bobby use this search string on goggle: buildings on newagtalk.com guys all the time posting about buildings good luck Ron

Sander is in the basement Thank you Mark Ron If anyone is interested in the Duplicarver, same deal Mark gave me, come get it. In my daughters...

I appreciate all the effort different people have put into monitoring the dust in THEIR shop and what they do to lower it. I do not wear a mask in...

sounds like starting capacitor or centrifugal start switch hanging up

would go with a gym floor finish, lasts for a year in high school gym use, then gets screened and new finish applied. Should last for a lot of years...

very interested trailer is on the van now so a few hour drive each way and done deal except wife has a yard sale fri, sat, and plans for sunday. PM...

kinda hard to answer. I have installed/changed out around 30-40 vfd's over the last 30 years. However my short term memory is not good. Doctor says...

I have this one on a bandsaw with 2hp motor, easy install, happy with how it works for occasional use LAPOND SVD-ES Single Phase CNC Vector Control...

got similar letter yesterday, except mine said $50,000 dept would be settled for $25,000. Straight to trash can along with the rest of the junk...

nice view Ron

December of 2021 wife and I t-boned a guy who ran a stop sign. 2015 Ford Mustang 110,000 miles, v-6, automatic got around 20k for it after arguing...

I have to ask, why is the bucket sky high? Bad habit to get into, easy way to roll tractor over on it's side Ron

Looks like a hydraulic top link on there, definitely a nice tool to have Ron

Regular full load amps, IF the VFD is programed correctly (probably factory settings) then it will ramp the motor up to speed instead of drawing high...

$5.49 advertised price today here Should not be any problems with running heating oil AS LONG AS IT IS USED FOR OFF ROAD Ron

that grease cap has been around for a long time on rotating equipment. Learned about them on the farm growing up, feed mill as a teenager working...

the threaded cap gets packed full of grease, then turned every so often to force grease between the shaft and the housing can't help on the rest Ron

I have a SawStop 5hp ICS, 36" fence, single phase in a home shop, no problems so far. At the High School where I work, they bought a SawStop 5hp...

Comon to see that in pallet wood. Caused by nails, dirt gravel and other material that has been ground into the pallet wood. Work with clean...

Like Mike I have the Dewalt 12v, 18v, 20v and 60v. I prefer the 12v in the shop and around the house. 18v and now 20v at work and for larger, heavier...