Alex Zeller
Contributor

So here's where I'm at. The oval is made but I haven't routered a detail around the outside edge. yet. Here's the final design I came up with and a...

I have the Lenox Woodmaster B in 1" 1.3 tpi. I got it for my 19" Grizzly 514. I hadn't decided on which carbide blade I wanted and if I did...

Another word of caution is if you position them out at the edges of the bucket it doesn't take too much weight on just one side to tip over your...

I've had mine for several years now and there was a few things I needed to finish. First was the pressure bar. It's a powder coated orange color. ...

I glue both sides as I like to work the PVA into the wood. The exception is if I can move both pieces around some to help spread the glue. If...

I would buy a lead paint test kit. Most places wouldn't touch it if there's lead paint on it. Depending on what type of person you are you don't...

It's hard to tell just how steep the land is. You did say there was only one building site without lots of work. To me that's kind of a turn off...

Be careful of the new aftermarket FOBs. They are usually very cheap quality. I had one and within a year one of the switches came off the circuit...

Back in the day when you wanted to unlock your car you would pull your key out and stick it in the keyhole. For those down south it may seem like...

I second this. If a tooth on the hole saw bites in it forces the flute of the pilot bit into the metal in the side of the pilot hole. That'll cause...

If you don't want to deal with customer support can you switch the cables with another axis? If the tripping problem moves then it's most likely...

I've heard that used car dealers keep the second FOB when they get a car with two. There's companies that sell them used that buy them from the...

I have the 600 grit diamond wheel on mine. The only problem is that it would be nice to have the course wheel and extra fine wheels as well. So the...

Those plastic buckets are like the old glass baby food jars. At first you save them thinking that they are a bonus but after a point in time you end...

I'm not sure if having a bow in the fence is a problem. Twisted would be though. Glad you got it solved. I think the problem is that demand is so...

I'm thinking that the best way to do it is to make a very fine line on the spoil board at the correct angle so I can make the cuts. I'll then glue...

The only reason for going with a finger joint vs splines was because I've never done finger joints. They seem very simple but until I do it it's...

Unlike steel the pitch doesn't have to be perfect. Some of the inserts did have flat spots on them but not sharp enough IMO to cut threads. I'm...

Pat, since you are in PA I would use Tools Today. They have a 10% off for first time buyers but the code always works so you can get 10% off all the...

If you have the room and since you own a mill I would look into building a solar kiln. Around here you'll risk getting powder post beetles in the...

I bought a set which should be here in a week or so. I got one that uses 1/4-20 threaded rods so I'm hoping that the insert is also an easy to...

Looks more like birch than maple to me. The maple I use the grain pattern is different. Often there's a difference in color that makes the long...

I have a Shop Fox under my 20" Grizzly. I think it weighs around 800lbs. I could have built something but not for the price of the SF (when I...

Have you thought about rare earth magnets?

I read the title and started trying to find where in NYC 42nd street and 106th street would meet. I was expecting a picture standing at the...