Alex Zeller
Contributor

I've also had really good luc with Lenox Bimetal blades. I've thought about getting a carbide resaw blade but I just don't do enough to justify the...

The world is full of woodworkers who realized their mistake of buying the wrong tool for the job because they wanted to save a buck when they buy one...

I once thought like you and picked up a cheap 14" cast iron BS and put a riser block on it so I could cut blanks for turning bowls. It was slow and...

I still have a laptop with 7 on it. It was a company laptop (large blue tech company) so it can't be upgraded without paying. I like 7. I leave...

A quick check on Powermatic's website for service centers list several in the Tampa area who do in house and field repairs. I suspect if you called...

Never bought an extended warranty and even if I had to spend $12k on a transmission I would have still come out ahead by not purchasing one once you...

It was a real guess at RPM. The link you posted to the Chinese one on Amazon was a 6 to 1 ratio. I made this one 4 to 1. The stepper can go so...

I made a second leg out of some scrap read oak (newel posts). I'm still trying to decide on what the final pulley ratio should be. But I found the...

It's nice to know that it comes off the spoilboard easily. The machine I was using had a 20hp vacuum pump, not something most people would have the...