Zachary Hoyt
Contributor

I had a woodmaster 718 combo that I bought used and was happy when I sold it. It was a sorry excuse for a planer, though I didn't try it as a...

Just as a general principle I would suggest looking at the chain to see if it is dried out and sticking.

There were times during the price spikes of the last couple of years when PT 2x4x8s were less than plain ones on the Lowe's and HD web sites. Both...

Yes indeed. It's certainly much heavier, and that is nice except for when I go back up Monday and have to get it up onto the mobile base. I met a...

Thank you very much for the tips on shimming the table. I didn't see your advice till tonight. I want to do that and a few other things to it once...

Our current DSL internet at the farm is slow. I just ran a speed test and got 2.21 mbps download and .76 up. I've signed up for fiber-optic at the...

I have been bitten twice while bicycling and had several near misses. My approach is if I am on my bike and a dog gets on the pavement and is close...

I use 80 on a 12" sanding disc and in the drum sander to shape or flatten things, but on the ROS I generally start at 120. I'm mostly not ending up...

The saw is now in the new workshop and put back together. There were no shims, so either it came without them from the factory or they were lost by...

I bought my current car on eBay from Philadelphia and had it shipped up here. Everything was fine, though I had to do a little research to find out...

Thank you all, this is very helpful. I can't get it loaded on the pallet because the bus doors aren't wide enough, though it would be handy if I...

Thanks for the advice. It's a mini school bus, so the inside of the body is roughly 16 feet long, 7.5 feet wide and 6 feet high, but there's a chunk...

Thank you all very much for the help. If the numbers in the HD link are accurate then it must be compressed somewhat, because 12 batts at the size...

Thanks for the help. I had to leave early Monday morning and didn't get back till last night. The motor is original and I was able to find a...

Thanks for the suggestions. My current table saw just dumps the sawdust in a pile underneath, so I can figure out the dust collection later on, when...

I picked up the saw yesterday and it looks good. The last person who worked on it had seemingly failed to put the key in the keyway of the pulley...

I had a Jet 18" saw from 2014 to 2021 and put the orange Sulphur Grove urethane tires on it as soon as I bought it, since the lower tire was falling...

Probably because there's not enough sea ice left for them anymore.