Kyle - the build quality of the C26 is great and I've been more than pleased with my one so far. Few notes: Due to the way the fence is designed, the narrowest cut is just slightly over 1 1/2". This really isn't a big deal as a Fritz and Franz jig can be made for narrow rips. The crosscut fence on the outrigger is set up as a two-point type system with a crummy stop which I don't care for. I would strongly recommend ordering a flag stop along with the machine, see below. I'd also recommend ordering the alternate shaper guard There's also a miter fence that is useful for picture frames and smaller items. Slot morticer as well if you don't already have a Domino XL. The machine is a great space-saver in my tiny 12' x 14' shop space, very happy with mine! Let me know any other q's. -p