Like Rob, I too adopted the Cosman method buying the 300/1000 diamond as well as an 8k and 16k Shapton a few months back. Unlike Mr Cosman, I use the...
Not sure hiding the dirt is going to work for you Perry. It just gets deeper;) I like the look but will you be able to find that screw when you drop...
I routed some 1/4” dadoes in the legs of a bookshelf I am building. The panel is 5/16” so I figured I’d plane it down to 1/4”. Not begin smart enough...
On the 2660 I have grab hooks in line with the arms, elevated so the pull doesn’t deform the bucket lip. I welded the center eye for the shackle. It...
I bought the Parf Guide II a few months back and used it yesterday to lay out the holes for the shelf pins for the legs of a book shelf I am working...
I retired at 70 and it took a while to understand that I no longer had to answer the bell. I have done so. Not a small thing when you have worked for...
Dave, these are the forks for my BX’s 2”x.019 riser with a pretty heavy 3” channel. I thought I would need to weld some gussets at the bottom of the...
The Van’s RV-12 has been the leader of the pack in schools. It falls under the “Light Sport” category with the FAA. Their selection of aluminum CNC’d...
I think Rod’s plan is the best design. If you can do a nice clean job cutting the angle iron and get a good fit up it will be a good beginner welding...
Find latest posts
View Articles
View Blog Entries