Thomas Wilson80
Contributor

I waited several years trying to save money thinking I’d make my own, but recently purchased a couple different raptor angle jigs and the 2” gouge...

Looks great! Thanks for sharing. Tom

Ronald Kanne in the Netherlands built a coring machine to start with log halves but I’m too afraid to try it with my Oneway:...

Good info - thanks to all. Growing up in Utah, a lot of the trees are cottonwood and I find that, while not my favorite wood scent, I find the...

Haha, Thanks for the comments - I stayed up late Saturday turning and then wanted to send a pic to a friend just before church….the smell of...

Mine is at the very front too - in my prior shop I was very limited on space and would push the grinder back whenever I needed to use my workbench...

I’m also a fan of mounting to a separate piece of wood. Better for potential mobility and easier to position for maximum comfort. Here is my...

I’m not sure - I’ve never used Tries and True or plain linseed oil. I’m sure it’ll be fine regardless but be sure too show us your end result.

I also like Watco Danish Oil. I think it pops the grain nicely with just a coat or two and if you want to build up a bit of a sheen, you can do many...

I don't have much experience turning cedar, but was given a 4" in diameter ERC branch a few years ago and made a few wands and small boxes from it. ...