I usually install rubber feet on furniture. To keep the feet in place I drill recesses into the bottom of the legs, best done after assembly. A bench...
Most of my work is relatively small and an outfield roller is adequate for longer pieces. This small 'fence mounted' outfeed table helps more than it...
Joe wrapped some stranded electrical wire around the hose and put an old wrench on the other end that just lays on the floor. Apparently that grounds...
Yes you're right about Oak and my process. It's such a good wood and hard to quit on. It's a wood that demands very careful grain matching and stain...
One under appreciated detail when steaming; steam leaking out the far end of the box does not equate to "start the clock" Insert a thermometer into a...
Make another arc with some less beautiful stock. Suck it in a little and glue it down to the table. Maybe add a few 4" high glue blocks. You now have...
Maurice, after watching the first video it looked like a hopeless task. The 'underside' video is muchmore hopefull. The joists and flooring seem good...
Among my FIL's stuff we found about 30 gift cards. Wife spent a few hours finding only one had value. All the rest were spent but kept. Dios Mio! You...
Find latest posts
View Articles
View Blog Entries