If you store the chisels bevel down it will lift the edge off the wood, possibly preventing rust from moisture in the wood. Also it makes the chisels...
Yes I have feet on the bench ready to install but it sits beautifully as is and that counter never gets wet. Besides, that would make a place for the...
1/8" will be fine for bottoms and cabinet back. Glued in works great. Gives a more solid feel. So just make a 3/16" wide rabbit 1/8" deep for a flush...
My brother gained access to a pretty nice mill that hadn't been used in years. It even had a stack of logs he could have. Cost him about $200 to get...
When we had our house built in '86 the cost for living space was $50/sq ft. Add a basement $5/sq ft Add a garage 5$/sq ft. Of course the numbers are...
A story stick (maybe a 1 x 1 the length you want to repeat) can make setting each piece in place on the sled quicker and more accurate than measuring...
You are going to make some mistakes. Embrace them. Agree with the advice to make a few practice joints but cheap wood may not be the most fun to work...
All the same depth is a bad plan, a lazy plan. Set out on the bench what you plan to put in each drawer then size the drawers for that. A deep bottom...