With your space limitations, maybe you can't have an aircraft carrier to land your planes on. A bench-centric shop may suit you better. Shrink the SS...
Snap lock duct should be fine if it is not put under full suction. Screws and rivets may catch tangly stuff and can be a real pain if the duct needs...
If you store the chisels bevel down it will lift the edge off the wood, possibly preventing rust from moisture in the wood. Also it makes the chisels...
Yes I have feet on the bench ready to install but it sits beautifully as is and that counter never gets wet. Besides, that would make a place for the...
1/8" will be fine for bottoms and cabinet back. Glued in works great. Gives a more solid feel. So just make a 3/16" wide rabbit 1/8" deep for a flush...
My brother gained access to a pretty nice mill that hadn't been used in years. It even had a stack of logs he could have. Cost him about $200 to get...
When we had our house built in '86 the cost for living space was $50/sq ft. Add a basement $5/sq ft Add a garage 5$/sq ft. Of course the numbers are...