Randy Heinemann
Contributor

I would agree. I have a Rikon 10-325 with a 1 3/4 HP motor. I have resawn 10" material and, while you need to go slow, the speed of feed isn't that...

Glad you fixed it, but I'm not sure what caused the problem to begin with.

I have a 1 1/2 HP Oneida cyclone and use a split collection method via a Y connection; a 4" connection to the bandsaw's regular port and a tapered...

While I have bought 2 third party accessories for the Domino, I have found that the Domino is a self-contained tool with whatever accessories it came...

I own a 325 and have not had this problem. Have you called Rikon? In the past, at least, I've found their support to be very helpful. I confess I...

Probably everyone has said this, but I wouldn't recommend selling them, especially since you have been using them for awhile and are used to getting...

There are way more resources available today than when I began woodworking in the mid-1970's. I appreciate access to YouTube, forums, and various...

I'm curious why this topic generated so much reaction and discussion? I would completely agree that there are tables out there that are needlessly...

I may get some disagreement but I don't think you need a straight edge that long to make sure the two surfaces of a jointer are in alignment. The...

I ran a dado set on my Ryobi BT3000 when I still owned it; not often but I did do it. As long as I was mindful of its power limitations and took...

I have almost exclusively used a mixture of beeswax and mineral oil since I started turning a couple of years ago. I also don't like high gloss...

Using a 3/4" blade on a 14" 1.5 HP bandsaw will likely not increase the performance of your saw. It's my understanding that there are 2 issues. One...

Apparently Nova isn't one of those companies that feels any obligation to its customers. For me, in the future, I will take that into account when...

Dedicating a blade to resawing only is a good idea. If you use a blade for cutting curves, especially tight curves, it can heat up and take the set...

As I have aged, I draw the line when I have all the tools I need to do essentially anything I want in wood. I reached that point and, although I...

Just confirming what everyone else said plus dull blades will also sometimes create problems because the blades aren't cutting as efficiently as they...