Bill Dufour
Contributor

UC Berkeley closes off the city street that passes through the main campus near the top. They do it for 24 hours once a year. Normally new years...

That is the way I would do it. Removing the glue at the middle piece so it look good will be tricky. Easier to add a transom. Bil lD

Does it freeze where ever you live. Tree roots, orangeburg pipe? Bil lD

I assume in Canada?

It is fine for the total amps of all the breakers to add to more then 50 amps. They should be balanced, equal loads on each of the two legs and not...

Tesla should be adjustable max input.. 40 amps for 50 amp seems correct at 80%. Bill D

First one I have ever seen with eucalyptus. Does not mention Almond which is very popular here since the orchards are replanted every 20-30 years. ...

I would install a small breaker panel upstream of the 50 amp outlet. Six or more breaker size. You will only have to buy two feet of #6 wire. Does...

right side, right hand on the mitre guage, left hand on the wood. right side because long stock must be to the right of the blade. An offcut more...

$200 buy a used shaper. Bil lD

Harbor freight has a good supply of casters of varying size and quality. Often cheaper to buy a four wheel furniture dolly then four casters of the...

I would mount it as high as possible to not block light. I hang mine with plumbers tape or old auto serpentine belts screwed to the ceiling. 6" PVC...

Again, we need an idea of local conditions. do you get snow loads? Do you have to clear snow off the roof. Any huricanes, tornadoes. is roof clay...

For primer I would use stain not paint so the wood can breathe. I would have to use a webster or leaf blower to get dust and cobwebs to a reasonable...

links https://www.busybeetools.com/products/2-hp-cyclone-dust-collector-w-hepafilter.html ...

Throw out the lock washers, use lock tite. By 1880 they knew lock washers did not work. The knockoff lock tite from harbor freight is better then...

I guess 25.5mm

I would mount that switch box out 5-6 inches so it just almost sticks out from the front edge of the table. Stack up some 2x4 to get the distance...

Does just a main breaker in the panel next to the meter meet that new code? Sounds like it does to me. Bil lD

Check the topic on the workshop forum.. it is #1 now. Bill D.

store it carefully. The recommended way is hanging straight down on a nail in the wall. Rust will destroy the accuracy as will a coat of grease not...

Sears is still in business?

It is not a check. It is a debit card in a envelope that looks like junk mail. Are you sure you did not throw it out? It is not from the government...

Only if you run them 24/7. Do you ever turn them off? What is the exterior climate? How expensive is electricity on your continent. You do live...

Didn't one of the recent US Presidents do some woodworking? Bil lD

no idea. Maybe a 36-714? Is it a tablesaw?

The Movie "Galaxy Quest" is based on the idea that another planet sees a scifi tv show and believes it is a real unscripted documentry. They...

Use joiner and plane or planer as search terms. Bill D.

Any reason not to set the teeth on a non-carbide blade to increase the kerf? Bil lD

Aluminum foil is less likely to crush.. Good luck keeping it dead flat and not wrinkled. Maybe take a much thicker washer and grind the angle into...