Chris Padilla
Moderator

https://lasercenteredgefinder.com/product-category/battery-powered-lcef/ The batteries last for years as long as you don't forget to turn it off...

Wow, absolutely stunning work Mark, you are incredibly talented.

I have four of the Harbor Freight hydraulic tables, three are 300 pound capacity and one 700 pound. They are small but very handy. Last month I upped...

You can purchase an after market laser that goes in the chuck. It has an adjustable beam that can be smaller in diameter than a mosquito's...you know...

ShopBot has a line of machines that are comparable to CAMaster. I know that there are options for mobile bases on the smaller machines. I like...

It's way more than you need--especially for a short run. It may also exhaust conditioned air causing your heating and AC bills to skyrocket.

No changes to the software here in a long time, John. And yes, I was going to guess on 15-16 being the limit.

Yes, drill through holes through the post, pardon the expression :), slip the tenon in all the way and mark the through hole location, pull out the...

I unfortunately no longer can find the photos of the guard/collection head I built but it was pretty simple...a rectangular box with an open bottom...

I really like the good intentions that so many would have to support charitable works if they happened to hit the "big one". On the other hand, a lot...

I agree with you....closed branches have no real effect on performance. Only the open gate(s) have material effect.

When I had my cabinet saw, the Forrest was my go-to for dados, grooves and rebates on the table saw. Do note that it (and many other higher end) dado...

Malcomb, that gate-door is gorgeous!!! So is the art...

Years ago, I build a "more productive" hood for an older Delta Uniguard that didn't actually have dust collection capability. I used .25" Lexan and...

If you want a more massive wedge, it's going to require the taper, IMHO. But your alternative is to drawbore and pin with dowels. Those tenons are...

When the shop itself dictates using the short cone version, that's a good choice over something lesser...'just understand the small difference over...

Woodcraft sells (or at least has sold) universal replacements that will work with most air cleaners. I put one in my JDS a few years ago to replace...

For your application, I'd use a high quality extractor/vac rather than a typically woodworking dust collector because the tools you mention are small...

I see no harm to the 6" drop to the table saw/overarm location and the 6/4/3 split. (You will likely need to use a 6/4/3 wye and adapt the hose for...

John is correct...there is more than one version of the product. Rubberwood is very popular for mass market furniture like that that is made in...

I think I'd put up at least a simple fence to delineate that area of your property that's on the other side of the creek, as it were. A lot of folks...

One additional point...there is a physical limit to the number of images within a single post beyond the 8 that cane be attached...and "smilies"...

That's really nice, Brian! I'm sure the family felines will appreciate it. :)

On the weed tangent, pre-emergent products that discourage or prevent germination have to be part of the maintenance plan. That will reduce the...

I thought there was something like that! I'd go for that for an old work box being mounted at a stud location!

Shapeoko Pro gets you linear rails, although they are still using the belts for positioning. HDZ Z axis upgrade gets you a ball screw there where it...

I guess the information I read was incorrect, Kev. At least you can easily transfer that money out lickety-split into your regular checking account....

Clarence, I have a PowerMatic 3520B but Vicmarc, Oneway and Robust make lathes.

Tim IIRC there is a limit of 8 photos per post and no limits to the length of a thread. One can make more than 1 post to get more photos within a...