Chris Padilla
Moderator

Yea, I was pleasantly surprised that this came together visually as well as it did, John. In addition to the SYP, there's regular white pine as well...

Unless you post your property and create a physical barrier, local law enforcement will do nothing. The level of the offense is at best a...

The dust doesn't care as it's being carried along by the air flow your DC generates. Gravity has very little effect for this particular kind of...

I only learned about the update recently on a Bent's Woodworking video. My original one is missing and I'm using my track saw a lot more now with the...

Going up to 12000, there should be pretty much a gleaming, near full gloss surface that can only be improved with polishing. Do keep in mind that...

I don't understand the comment from LE to you about "public property". Unless the tree is in the municipal easement, wouldn't it be private property?...

If you run Windows via "bootcamp", it's native Windows running on the Mac Intel hardware and MacOS is not running. If you run Windows in a virtual...

Tabs are fine for keeping parts from flying, but you have to be able to keep the brass on the CNC table securely and perfectly (and I do mean...

Moving right along.

But with a track saw, Alex...there is no offset. The edge of the rubber on the track IS the cut line. That's one reason they are so nice to have and...

I clearly missed that you were doing a wrap of existing posts...my bad.

These programs like Capital One Shopping and the Rakuten that I mentioned provide additional discounts beyond the rewards that the card used...

The solution for vacuum with things that will have open areas is a custom fixture which is very common for production type work on small things. You...

Honestly...I stopped used wax many years ago. If I truly need to refine the finish, such as for a table top, including adjusting sheen, various...

Since you mentioned furniture, one of the things you want to strive for in a machine is one that has a bit of Z-axis (vertical) height/travel for the...

I don't disagree that the risk from the brass isn't high...but I'm pretty anal about promoting best practices because there can be "that one time"...

More and more contractors are finding track saws to be an essential on the job site these days, not as much for dust collection as for more precise...

Really not supposed to do that with metal cutting because of fire hazard. Remember, the chips are what takes the heat away from the material and...

That sounds like a good outcome, Bill. As much as I liked my older Macs, the 2019 has been a real cut above in every way.

This is the method I used for my own recent project...they were specially made, articulated hanger bolts that could support whatever angles are...

STP is...a typo. :) Yes, SYP. A "stout" piece of construction lumber for sure that just needed a new job other than hanging out in my lumber tent....

Power and efficiency are not necessarily mutually exclusive. The thermal efficiency of a vehicle might be 35% or so. Bump that to 40%, and you’ve...

Post number 2 says it got political.

I'm with Kevin and David...simulate the through and through at the surface but use a half-lap tenon in an easier to cut rectangular through mortise...

Make a custom scraper with a piece of steel and some files that you can get in close to scrape the roundover followed by refining that last little...

OP stated that Windows compatibility was required. That's not a happening thing on M1 or M2, other than fudging with the ARM version of Windows which...

The PowerTec hose I get from Amazon pretty much stays "at length" for me and I'm also moving hose around in my temporary shop where I can appreciate...

Your Gladiator should be just fine...I suspect it's multiple boxes, too...saw plus fence, for example.

I seriously doubt you're going to find substantial discounts on the SS "out there", but you can check reputable vendors like Tool Nut, etc., to see...