Chris Padilla
Moderator

This forum will be very helpful to young ones starting out. Save, save, save your profits. Live UNDER your means. Pay attention to the economy and...

Tom, there are many of us who take commissions but don't earn our living from woodworking. The business concerns are the same outside of scale.

Nope...only about 6 miles "as the crow flies" and the 'Creek is in the same place. My shop moves, too...I'll just have a smaller space for a bit...

Sale pending receipt of deposit.

I found out that a guy I know has a 1/4" x 24 tpi tap and also has the brass rod to make me a new knurled thumb nut from...!!! Looks like I could be...

I am not a pro....at least I don't call myself a pro. :) I've been doing woodworking since I was 13 years old. I am 61 now. All the work I do is...

I ordered the Router Plane cutters from Lee Valley. The 1/4" cutter fits perfectly in the router plane. One router plane working. Now to find a local...

Jack, I am an amateur woodworker with a 720 sq. ft. standalone shop. Among other things, I do turn and use a air sander at the lathe. I have a 26...

Just a few more.

I was very glad to see your comments this morning that you were taken care of...it's good you now have a keypad that's working correctly. You may...

That was the best decision they could have made here and the end result will be far superior, too.

Liesl I have engraved polycarbonate with a co2. You will not achieve optimal results due to the discoloration and the clear, rather than frosted,...

Bert Why can't you run it in the x axis?

Be careful with those bar baits. They used to contain a blood thinner that had an antidote if a pet eat some. Now they contain a nerve agent for...

Interesting. I’ll certainly check it out, though I doubt it would be worthwhile for us—we don’t replace that many receptacles. I doubt I’ll be...

The instructions say to wait 15 minutes before applying additional coatings of cement. I suspect that Bruce is correct that the cement you applied...

That is way cool! Thanks for posting the link. It is fascinating to hear the different music forms from around the world. I wish there was a...

Plywood because of the environmental stresses that come with RVs that have greater temperature and moisture swings that in most homes.

I do a very careful and tight twist to get a great mechanical connection, snip the end clean and then screw on the wire nuts. If I'm feeling really...

Yup, I was going to respond with Patriot Guard Riders. I rode several missions with our local PGR group. It was an honor to serve in this capacity.

more for you.

One other thought. I've noticed on some wood that there is tear out on the bottom of the cut that sometimes hangs down and catches on the throat...

My guess, based on about 12 years using Trotec, is that they have the parts on hand. Even if they don't it's a one day flight and delivery from...

ROFLOL! I will probably be shooting for 20x30 or 24x30, give or take. Some of that comes down to zoning and some to money and appearance. I'd...

For the modern outlets, etc., that have the side clamping mechanism, there's no more chance of contact with the side of the box than with traditional...

In our current home, we have soapstone in the kitchen and honed/antiqued granite for surfaces in our addition. (master bath, guest bath, wetbar) The...

We have the same problem here every fall the critters are looking for a warm place to live. The cat can't access the garage, so I use peanut butter...