Chris Padilla
Moderator

I haven’t used it on anything as large as your drum but Goof Off works well at removing adhesive. Safety precautions (gloves, eye protection,...

That’s nice and all, John, but what do you do AFTER breakfast? ;)

Exterior finishes are LESS waterproof and SOFTER than interior finishes. Any KCMA certified finish should perform well; IF no one uses a knife on...

Your only solution is to block access to the space with screen or other material. They will build nest after nest as you tear them out.

Congrats! You'll enjoy having that thang keeping you comfortable year round for pennies.

Michael, I probably read them once. It's rare I revisit a book, fiction or nonfiction, honestly. 'Glad your package arrived!!

It's springtime on the farm for John, I'd bet he's quite busy.

today's lot.

I have no experience with water based poly in that application.

If maple isn't a significant amount more cost, it would be a better wood to make the door out of. I would advise painting the panels completely...

I made two towel bars more than 15 years ago out of red oak. I used MinWax fast drying polyurethane as a finish. They have seen many damy towels...

You need about 40psi to operate it properly... It is spraying correctly when it sprays a round pattern similar to an aerosol spray paint pattern. ...

It could be glue from the plywood process, possibly pressed up through the surface ply by the pressure at manufacturing.

Most of my trunks have double locking casters. For those that are "travelers" I use larger casters so they are more amenable to rolling in less than...

The aluminum version was a good idea for a number of reasons, especially for a 10' ceiling. The wood one here in our current house is somewhat heavy...

HEPA filter on the unit...and then vent back. You will not lose whatever residual heat you have that way. If you vent outside, there's no point to a...

Joe, that's exactly while I'll opt for the SC-3C when I make my move. I'm used to having those "things" with the larger saw and despite the SC-2C...

I have built a number of tack trunks for travel/show use out of the dozens in total produced. Folks do not and will not use the plastic ones for...

If a woman has to choose between catching a fly ball and saving an infant's life, she will choose to save the infant's life without even considering...

Aaron, you should consider venting back into the shop via a non-direct path from your closet. The same area calculation is needed...at least the same...

I can only imagine, Erik. I don't remember any of the machines actually running during that show I helped out in the MiniMax booth a number of...

That's a great step to have completed...things can move along now pretty quickly I would think!

It won't destroy the machine but it will eat up cutters. A chip collector would be handy. I used Engravlab on my rotary engraver. Sandcarving is...

Yea, it's not a horrible practice, Erik, when plugs are available. Otherwise, there "should" be a hard disconnect but a good jolt can certainly jump...

If I actually remember, I'll try to take a close up shot.

John, yes, the buttercups are not good for many kinds of livestock, including horses. Same with other things that "just grow", so folks who have...