Edward Weber
Contributor

Thanks Jim, that's what I'm doing now. Just checking to see if anyone has any other clever solutions

If you're eventually going to cover it with drywall or T&G, I wouldn't go to the trouble of adding any additional layers of scrim paper or anything....

Edwin, I think you and Brian are correct, I could have worded the question better but I fear none of it would make a difference. In gross...

Time will tell indeed, there is no rule set in stone, lots of variable at play. Here are a few things the OP and possibly others might find useful....

There is fitted and then there's fitted. Top chisel looks to be fitted well but maybe on the tight side. Middle chisel has virtually no gap, that's...

Well now you should be off to the races with projects, looks good

Thanks for the laugh, I needed that :D

They just keep coming https://www.bbc.com/news/world-us-canada-68848098

I apologize to the OP for the thread going sideways. I intended my post to be within the theme and offered it as humor. Apparently some prefer to...

I have always edge guled the veneers together to ensure proper alignment, then sanded an applied to a substrate. This method worked for me, others...

1. I know what oil I require for my equipment, I am not confused. 2. Full synthetic 5W-40 diesel engine oil with Triple Protection Plus ...

Where I live, the opposite is correct. The summer months are dry, low humidity.

There may be a different machining process used today than there was when you guys who bought 10 or 20 years ago. As Jim pointed out in detail, a...

It was a continuation of the OP's theme of unclear, misleading, imprecise product descriptions, good grief. Not too many bikers are running 5-40...

A small amount of epoxy will keep them put and can be easily removed by warming up the socket with a heat gun or even hair drier. Doesn't matter...

Just giving suggestions but there are also different (harder) waxes than carnuba and there are also different qualities and materials of wheels. All...

Nice try A company the size of Shell (28 billion in profit last year) can afford proper advertisements, proof readers and even translators. ...

Bealle is a good system but you can always get different (better) poilshing compounds than the basic Tripoli and White diamond that come with the...

You can, so long as the finish is thick enough and fully cured. You usually don't need all three steps, the Tripoli is quite coarse for finished...

Some of the overseas item description are truly insane and make no sense at all, others are a little confusing or even a bit comical. I was looking...

I suggest looking at the condition of rented tools and see if you want to "lend" yours to someone. As James Pallas mentioned, you almost need to...

You can cover them with a mesh tarp that blocks most of the uv but also lets them breathe.

Well I think you inspired me enough to go make a few more trays/boxes, thanks for posting

+1 My immediate thought was, "so you like rocks do ya?" I hope they give them the maximum penalty for this. Sadly it seems, this has become some...

Sorry to hear, thanks for posting

If the trunions are cast iron, not aluminium, I wouldn't concern myself too much with the weight. You can only put so much on the table at one time,...

Congrats, please let us know how you like it

I made a rough & ready mallet for whacking my froe and pegs and whatever else sits still long enough. This is Mulberry from some cut-offs on hand

I think you could use some "different" type of storage :D If it works for you it's all good. I have to agree with the sentiment of them showing up...