ChrisA Edwards
Contributor

I solid edge band with 1/4" to 3/4" solid wood a lot. You can also buy edge band tape that you can just iron on, heat activates the glue. If...

I think plywood would be easier to do, plus more stable from warping.

Nothing wrong with an overhang around all four sides as long as it doesn't interfere with your reach to the center of the cut. I'd give myself about...

Here's what I used. https://www.amazon.com/gp/product/B003HDAB88/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1

This was General Finishes Wood Stain, Black.

So assuming you had something on the outfeed side that would allow each processed bought to stack on the previous one, at 1", you could probably only...

I don't think that is a part, it's a cheap wrench for assembly for two different nut/bolt sizes.

3' long, but how thick and how wide?

With restricted space and needing mobility, I also like to build the mobile bases and just add casters and utilize the space beneath the tool for...

I would probably build a frame out of PT 2x4's and then cabinet in the box, around the TV, with T-111 or something similar and then a good exterior...

I can see a policy off not remounting old tires, but dismounting them? Once you let the air out the only way that tire is going to hurt you is if you...

I don't think you can achieve higher levels of vacuum clamping, once you achieve max vacuum, you can't make it go higher. If you need more pressure,...

I have a slightly larger space than you, but everything is still on mobile bases. About the only tool that doesn't get moved is my tablesaw,...

As promised, but remember this is Version 2, one generation behind what Infinity is selling now.

I will make a short YouTube video, tomorrow, showing my setup. I've used mine with the blade tilted at 45 degrees.

You can get CNC router bits, 1/8" collet size, that go from 0.5mm to about 3mm. 0.09"-0.10" is 2.28mm to 2.54mm. If mounted in a router table...

From The Infinity Tools website, I have version 2, they are now selling version 3.

Same here, once I was happy with the Infinity, I haven't used my OEM inserts. I haven't had any issues with the inserts that are split for the...

I skipped putting those screws in. Once the complete insert is in place, in the table, the white insert isn't going anywhere.

I have these on my SawStop 3HP PCS. I've had them for about a year now. No issues, easy to swap the insert, the white part, out for the...

You asked for blade recommendations, I use a Forrest WWII Thin Kerf 20T rip blade on my 3HP SawStop. I also bought a thin kerf riving knife from...

The SS folding table most likely hits the 4" dust extraction port on the back of the machine as it folds down. I made a folding table for my PCS,...

No you are correct, but the one in the classifieds is very nice for the price and barely used. P.S. I have no connection to the seller, other than...

Hammer K3, for sale in the classifieds, but you are on opposite sides of the country.

Although, I gave you my info about my Sawstop purchase and experience, if I was buying again, and had the 240V, I most likely would buy a slider if...

I bought the 1.75HP 110V 36" Sawstop and the ICS mobile base. I used to roll it out for use and put it away when the wife came home, so she could...

That's what they told me a couple of weeks ago.

To Jack's point above, if you have any doubts as to whether the piece you are cutting will trip the brake, just use the override feature. When you...

You don't state where you are located. I would search for a local Wood Turning club. Almost every month, someone in my local club/area is selling...