Bill Jobe
Contributor

No, it hasn't changed, but the DC shed sits to the rear of the shop about 6' away, set back to the 5' required away from the property line. The...

This came up a couple of years ago, so I called (I think it was Minwax) and they said if you simply throw them in water so they are totally wet, they...

Have you considered vinyl? Quality has increased significantly in recent years.

Is the Kreg track saw system a good choice?

One of my favorite Far Sides:

Several years ago I bought something that netted me 2 $50 gift cards. May have been my first smartphone, I can't remember. But by the time I got...

Curt, you've sparked an interest in me for track saws. Those who own and use one, I would appreciate suggestions as to what brand and models you can...

It would be enormously expensive to do the ductwork using sched. 40 PVC.

I just called Charlottepipe and they told me that abs dwv (sewer and drain) is schedual 40 and will not fit PVC sewer and drain.

It's for dust collection so no need for glue.

I called Lowe's and the guy in plumbing said he didn't know. Tom, are you saying the abs fitting at the link will fit schedual 20 or 30 PVC dwv...

Well, I called them and was told they know nothing about compatibility with PVC wdv. No tech department to talk to....nothing. Does anyone here...

Have to looked at Fernco products?

I had to try it, John. I can tell you it took "many" cycles. I'm considering asking the wife for permission to turn a very small bowl in the top of...

3 or 4 years ago I cut down an OO tree, hauled it home, and that night I cut about a 2.75" slab, microwaved it, sanded it down and finished it. It...

They sell magnetic tape with an adhesive back.

How about some pics and I'll look next time I go there. Is there a model number?

Do you have a Habitat resale store? I see things like that every time I go to the one near me.

Just a tool belt would hold me away from my work enough, but mine would require strong suspenders. I can't even keep my pants up all the way. Lost...

I bought a 4'x10" roll and trying to determine uses for it that would give me the best bang for the buck. Or rather for the hundred bucks.

I'm not well read on the op's subject. Anyone try a pressure cooker?

I think I'll use Bill's suggestion....chunks of tires under the lathe feet.:cool:

I wrote to them. I'll post when I hear back. Check out the retail price and their price.

If abs can be used... ...

Here's an 8", but I need 6". https://www.pvcfittingsonline.com/8-dwv-pvc-wye-and-1-8-bend-1-pc-3777-080.html

This is what I'm referring to. Much better flow, I would think, over a wye and a 45 if you are going straight down. Many setups I've seen use a...