Its been a while but 2 pole breakers for either QO or HOM should be under $30 I would grab both if you are not sure and when you get to the panel use...
Disposable society. Id pay 1000 for a printer if it lasted 40 years. but wether you spend 100 or 500 they dont last very long. In that pile of parts...
Agree with Michael. If possible replace the breaker it will be less than $20 in most cases. The next would be, If possible, turn off all heaters and...
I always make sure I have the bit at least 1/8" from bottomed out. That way if it gets stuck a little tap on the bit will push it in the 1/8 and free...
Fred. Definately worth a look. Find out the torque spec and get a screwdriver preset to that number. Mine was $10 on amazon for my jointer planer. I...
I think the most important rule with cutting boards is all surfaces need to dry together. 1-1/2 thick on end grain 3/4 on face/edge. Outside of that...