Adam Herman
Contributor

all ceilings flat white for us. makes the rooms look cleaner, more open and bright. we have done accent walls as well, usually one wall is a color...

on the metal working side, it looks like they are really a few steps up from the griz versions. heavier, more features like auto feeds and DROs and...

that is a universal type motor and does not use a start cap. you should be able to link your video.

can you give us more info on the top texture? very nice work.

how about getting an escutcheon with the bar that is threaded for the tube, you could then screw the bar to the wood and use the escutcheon to cover...

if given the chance, always insulate. Its not that expensive in the long run and much harder to do later.

7/16 deep with a shallow cut or 7/16 cut at some thickness... i have edged 3/4 thick stock no problem, but never taking more than maybe an 1/8...

I have had this happen if the collet or shaft of the bit are dirty, the bit slips in the collet no matter how tight you think you have it. after...

how was the top achived, im thinking lay out, jig saw to make them fit together, dowels or dominos between? epoxy pour the whole thing? very unique...