I now do almost all template work on my shaper. The power and smoothness is worth the time to put together a jig to hold work solidly. I would build...
Personally I would wait and upgrade to a real cabinet saw down the road. That saw may be better in some ways but it is not really that big of a step...
I thought I wanted to do the same thing and in fact wired in a switch and contacter so the I could just flip a switch and open up venting one way or...
You will likely need to get a new spindle made (at a machine shop or otherwise) as opposed to finding one already made…unless you find another donor...
Yes great place to visit if you ever have a chance. I always try and find local woodworking shops when I travel but didn’t find or visit any one this...
It would be helpful to know what the details of the application are to enable a bit more of a specifically targeted response…as opposed to all of us...
Thanks George. Here are a few photos. I think you’re right that I should just build my own new collection boxes and attach to the backs of the fence...
I am looking for different sources and options for dust collection pipe “adapters” / fittings to connect 6” flex hose to a fence dust hoods on couple...
Have you even looked at the saw and assessed the condition of the sliding table, etc? It is foolish to assume either extreme (that it’s a project or...
Looking closer at the photos again, I see it is badged Rockwell (which mine is also.) This happened in the 80s, according to my research, so I would...
Home Page
Find latest posts
View Articles
View Blog Entries