Eric, the place is called Volunteer Equipment and Supply in Knoxville. It sounded like they have quite an inventory on surplus transformers of a wide...
I have moved several machines around this size or heavier into my walkout basement, which is about 40’ away from my driveway across the (flat) yard....
Changing out the motor is not a practical option. This is a geared head drill press and the motor is integrated into the head of the drill press and...
John, thanks for the reply. I have used a 2k exterior rated poly from Milesi on an exterior door with no real weather exposure and it was a dream to...
These saws are hard to find used. I have been looking casually for 2-3 years for a MM20 to replace my 80s era Italian 500mm saw. I’ve seen a handful...
I replaced all 8 caps and fired it up. It seems to be be operating fine now. There is also reduced “chatter” in the motor during start up. There used...
I have straightened a jointer fence by suspending it between two 4x4's and stepping on it slowly applying my weight. It worked like a charm. I think...
I would use PVA glue of your choice but instead of trying to clamp it off the plane, reinstall and use the stud that holds the tote in place to clamp...
Home Page
Find latest posts
View Articles
View Blog Entries