Malcolm McLeod
Contributor

I didn't realize the JIS didn't cover the full size range, i.e. down to the LS070. The LS090 is larger and will easily carry the Hp/torque, and...

Before someone castigates me for excessive spending of someone else's money, the J-I-S is way more expensive, but would appear to be a good option...

Late to the party, as I thought this would have been solved quickly. If going full-on replacement, I'd suggest the Lovejoy 'J-I-S' option (Jaw...

By panhandle standards I'm just around the corner (about 20 miles south of your McKinney corner, unfortunately), but will be in Midland Sunday night....

Does this pump produce 25-30psi? If so, run it to a dedicated geared sprinkler head or maybe a good ol' fashion impact head that will throw it in a...

Take a look at this... http://thewoodknack.blogspot.com/2015/01/ Another dirt quick search shows 'black/blue/yellow' motor wires all tied to same...

I have similar Jet and similar problem: mine only runs on high, no low or med speed; off-delay timers work fine; same output regardless of my inputs...

I experienced a massive case of cerebral flatulence on the first big case piece I built (from 'new' cherry) as a gift for my wife - a 8'W x 7'H...

I listened to the Oneida sales pitch before my purchase. I never heard 'separation optimization', but maybe they changed the pitch. As I understood...

+1 for my drill press; coupled to the DC w/ Rockler 4" x 2-1/2" adapter. Caveat for Mr. Barstow: the Loc-Line will stay where you put it, but it is...

I have the Clearvue EF-5 ordered with 5hp 3-phase motor (for my 1-ph shop). I put a Huanyang VFD on it primarily for 1->3-ph conversion and...

Realizing that you probably don't move the manhole cover everyday, even to back flush, but you may still need to move it. I'd be sure to insert a...

'Most' screw threads with typical TPI's are self locking, so give you considerable safety margin against auto-rotation (induced by load), and the...