Malcolm McLeod
Member

I think a lot of folks put their DC in a closet or attached shed - rather than 'in' the shop. Makes some sort of remote monitoring and/or...

My current thought is to use 1 level sensor with the typical NO (open) contact to drive 2 timers: Timer 1 would have a 5 to 10 second ON-delay, to...

To be rigorous, it would be wise to spec that an edge should be compared to the other and then swap end-for-end and compared again. Certain shapes,...

The pictures are one thing, but then you go and include the video. ...it's just NOT fair! First the knife ....and then you twist it! I'll just...

I'm afraid I can only give you a general answer. Most newer (modern?) sensors, timers, and relays pertinent to this thread have a relatively wide...

To me, worst case is the DC filters fill up and require cleaning. YMMV It is certainly possible to have the alarm function on zero delay, but have...

Excellent point. Spurious trips could REALLY degrade customer confidence. Still in the (mental) design stage, so will incorporate it - thanks. I...

I am working in this direction - ever so slowly. I have a Pentz DC with 5hp 3ph motor, driven by Huanyang VFD. I use Eton remote for...

I always recommend people look at the General Excalibur lift. It is rock solid, easy height adjust, and so far as I know, it may be the only 4-post...

So, in light of new rules, these, uhm, 'clearly' MUST be for ...you know... sawdust. Right? Or pollen. And I'll have to cut waaaay back on my bank...

^Interesting idea. Not sure of the available sizes, but it made me think of DIN rail (35mm wide, and either 7.5 or 10mm high), available in 1m L.,...

I have not looked at every link provided in this thread, but the ones I have looked at do not have an auto-drain mechanism built in. You would need...

Look for "barrel / slide bolt". I believe most are round bolts, but some are rectilinear and they will be more suitably sized than stake bed...

Been doing it for a while too. My dad's last USAF duty station was working inside Cheyenne Mountain - 1965-66. They were keeping tabs on Santa even...