Warren Lake
Contributor

Dont know the sander but can you not use large angle iron. Im pretty sure on my progress machine 6" wide belt the fence is a huge chunk of angle iron

for 400.00 to 1,000.00 you can buy a used cabinet saw. You can add a few jigs made from scrap and probably have a better saw than most shown here. ...

putting ply down works great, its no different than a zero clearance insert and maybe better.

drop a sheet of quarter inch ply with a stop block front and back on the table saw. Turn your blade up through it and thin rips are fine.

think its called an Orbit what they do for your eyes. have been in the tube a few times

20 x 20 box fan in a window. So 3M ambient air blower there. Quality product one sales guy told me they were overbuilt. Hoods stink compared...

https://www.youtube.com/watch?v=7VN6qwqXVVI

I have one General 350 no wings. I agree with that as well. I cant stand all those light saws. Last used a ridgid whatever full size thing at a...

George sounds like their is a poltergeist in your room or your family might be trying to kill you and collect the insurance.

the craft is one thing. Finding machines takes time and ongoing another. Moving is a whole other adventure and its a moving target at times and you...

done tons of work with routers not had issues with them. Snapped some bits pushing too hard, operator error.

I have some fairly heavy duty rollers and stuff moves easily on them. The only neg is they have to be aligned perfectly with your travel or your...

and I thought id catch hell for doing walk abouts on my bandsaw table :)

have seen Norton, Have seen Bell and sent it to them. Calls from Amazon and Rev Can and and. each time nice name and sounding like Peter Sellers in...

I liked how it was and is again as you have some number of other you tubes on the screen same time, six or seven from memory.

This was a ceiling done to stop sound transmission. It worked very well. Number of layers of drywall with roxul compressed between with acoustic...

Had a recording studio when young, you can take it as far as you want, floating concrete floors on springs Separate 2 x 6 walls on each slab that...

walked on one of the bandsaw tables many times to reach up to get things on the wall. Have to stop doing that and will.

so we really do have the power to change the world.

looks like the switched it back.

I cant work in shorts in the shop or landscape, get beat up. Kneeling at times as well.

any new router is a smooth machine compared to ones that have worked hard. My Makita plunge 3Hp started out tight and became a rattle trap. Not the...

seems Bills answer is what happened. Looks like im not the only one not impressed. Just had a friend pissed with technology on his apple stuff and...

those machines are amazing Mark. Fast and clean. I guess the bottom left has a bit of a round to it which is fine. Derek here is what you were...

Up to yesterday the title was below the you tube and all other you tubes were down the right side. Whatever I must have hit now puts the title on...

I used a General drill press with attachment for a while. We didnt have the benefit of Jack who showed why chisels need attention over how they...

had to do mortises with a drill press at first. 1/2" mortises in birdseye pushing back. Not ideal but the work got done. The chain on the...

finishing nails, snip them off close, push your two parts together.