Warren Lake
Contributor

Last wadkin I saw sell was 800.00 plus had 8 chisels with it. The wadkin was likely 40 years old and irrelevant that it was.

Tom so what type of tires are on my 1962 Wadkin DR? Still in the graveyard, pretty sure its original tires.

End grain or side grain i double coat and dont thin. washcoat is a different beast for a different reason.

always change my own oil. Bought a wallywagon in SC. Way home got an oil change in Ohio as it was overdue. got home oil on the driveway next day,...

set up the rear wheel should not be turning, when cutting and putting pressure on it it should be turning.

Always saw bandsaws mostly italian at auctions for 750.00 to maybe 1,200.00. they were working in production at the time and most needed nothing....

some buy the land to park money and the land goes up and its sold seen this in TO past,. They want it to make money but more so they want the land...

you said the wood was cold. If you bring in cold wood you can get failure till its warmed to some level, you dont say how cold. Also age of glue.

Too bad a school is teaching that.

its a pretty wild video of that whole number of them carrying the piano side layers and into the jig. Reminds me of past people when they capture...

the toro I have also sucks up leaves and mulches maybe 12:1 into a bag hanging over the shoulder. Is this on any battery ones or only blow. I...

then they would be musical chairs.

Where do you get lifting straps? I use chains on the machines and they are great as you can lock on any place and adjust lengths and more. Only...

still on cord and at times its annoying. Think I read a review of a Milwuakee blower and some unhappy users but will check it again. I learned to...

Dont know the sander but can you not use large angle iron. Im pretty sure on my progress machine 6" wide belt the fence is a huge chunk of angle iron

for 400.00 to 1,000.00 you can buy a used cabinet saw. You can add a few jigs made from scrap and probably have a better saw than most shown here. ...

putting ply down works great, its no different than a zero clearance insert and maybe better.

drop a sheet of quarter inch ply with a stop block front and back on the table saw. Turn your blade up through it and thin rips are fine.

think its called an Orbit what they do for your eyes. have been in the tube a few times

20 x 20 box fan in a window. So 3M ambient air blower there. Quality product one sales guy told me they were overbuilt. Hoods stink compared...

https://www.youtube.com/watch?v=7VN6qwqXVVI

I have one General 350 no wings. I agree with that as well. I cant stand all those light saws. Last used a ridgid whatever full size thing at a...

George sounds like their is a poltergeist in your room or your family might be trying to kill you and collect the insurance.

the craft is one thing. Finding machines takes time and ongoing another. Moving is a whole other adventure and its a moving target at times and you...

done tons of work with routers not had issues with them. Snapped some bits pushing too hard, operator error.

I have some fairly heavy duty rollers and stuff moves easily on them. The only neg is they have to be aligned perfectly with your travel or your...

and I thought id catch hell for doing walk abouts on my bandsaw table :)

have seen Norton, Have seen Bell and sent it to them. Calls from Amazon and Rev Can and and. each time nice name and sounding like Peter Sellers in...

I liked how it was and is again as you have some number of other you tubes on the screen same time, six or seven from memory.