Warren Lake
Contributor

Used a ton of Fluid Film rustproofing my cars over the years. It has lanolin. When I drive down the road in the summer and pass a farm sheep chase...

had a sleeve made up that slipped over the router bearing for .020 over. Id rather have a router in my hand than router table. You can control the...

I was in a 200 person shop one day auction time and asked the shaper operator of one of several shapers no tilt? His answer was its not needed we...

had to look that up, what is the steel like? My fav chisel bought is Stubaii bought in Salsberg then years later found some here. Have some Berg...

offered Omgas a few times and should have scooped at least one. 225.00 Can dinaros, a good blade can cost that much and he would have delivered...

the weight makes a huge difference and more rigid, a light radial will almost flex to start to climb. At the moment I want no more from one that a...

only had a sears over 40 years ago so did all on it. No great thing but fine for the money. table saw safer the blade goes down into the table not...

1000 craftsman from Europe spent six years building it. Thats a pretty rare thing.

broke mine after 25 plus years, not had time to see what failed Carpenter gave me his broken one as well. Not negative on either. they are nicely...

picked up a wagon in Hilton Head. Went to Savannah, Beaufort, Charleston and Asherville on the way home. Asherville has a little home called...

axe Hired a carpenter years ago we cut my roof open, he cut straight down through shingles, nails and the 2 x 6's, first time seeing that. ...

I think they have different machining depending on brands, some leave marks more than others on light passes. Have found rubber on the Woodmaster...

did you check with your thumbnail? its the starting point a detailer would do. crappy photo, car dirty. Often hard to shoot stuff. dirt in the...

they are two different things, guess it depends on the mitre trimmer. shooting board cant do all a morso can do like a beaded face frame. Never...

think I read buckwheat is actually a fruit seed. There is some place in the US that grows one more rare type of it. Ive not tried the sprouting...

first of three worm drives i have is a black and decker, weighs as much as a small car. Jim what routers have eclipsed the porter cables. Since I...

dont know those combos but do have time on combos. Looks like a good machine from looking up a few of them. For sure what Patrick says as complete...

Ive done fine with portable cable but likely depends on what product. Past id have a tool it would be Rockwell. then next time its labelled Porter...

Dont know what that is but have you looked at Onsrud Inverted pin routers? Several models, nearly scooped one years back when a customer told me I...

You dont show a photo and even so sometimes hard to shoot to show the damage. If your thumb nail catches on it its too deep to sand and buff out. Im...

Watched this many times in the past. Time again. Sure Jeff was happy. https://www.youtube.com/watch?v=H6ooCngj0xI

same as Kevin, bits often tight when I go to remove, one or two raps on the side with the wrench and it releases. Not sure that would be in the...

internet is a huge help. I bought my 92 wally in SC. Way home cruise control would not stay on. No big deal but 1000 mile drive id like to use it....

worm drive over the line, router with straight edge originally made for doing that.

Knew nothing about him but his work was very nice.

yeah, I used to put the garbage out and there were seven days till it was put out again. Now its seems three and half maybe four.

thanks, that makes sense, I guess i needed to torture myself as I dug up most of the clay or in another location I ran troughs dug them into the...

thanks, what a pro set up. Ive been lucky with bugs and moths. Rabbits main offenders and minimal summer then go crazy in Jan. Im more than...

thanks, I guess tarps come off in the summer and hoops stay? very nice.