Jim Dwight
Member

I have some but I literally have never used them. I can see they would be useful for some things but I haven't taken the time to cut the dovetail...

I use and like my SawStop PCS with the 1.75hp. I thought it would be able to handle full kerf blades, like my BT3100 did, but it does not. I had...

Radiant heat transfer is a function of the temperature difference to the fourth power. The surface also influences it but the primary thing is the...

Good luck. I have this saw but I don't think I need new tires. I haven't used it a lot but I do like it.

The easiest explanation of the observations you report is you had teeth touching when you tightened the nut. If only the plates were touching, a...

If your saw as a port that gets a lot of the dust, even without dust extraction turned on, then I think it's important to connect to that, even at...

I look at 2-3 inches as normal but I used narrower in a bathroom cabinet that is not very wide. I am not a "sketchup" person. For any significant...

I have a large rolling rack with compartments for storage and put them other places including leaving them on the floor (which is not advisable). I...

If the tools have universal motors (i.e. they have brushes) then they should work. If they have induction motors they may not, or will not turn at...

If your oven is a double like mine, you should have help removing and reinstalling it. I did all my other appliances by myself but a double oven is...

I bought my kitchen cabinets including the one for the double oven. It is a "Kraftsmade" and came finished inside. Not as well as the outside but...

I don't really know anything about COPD but I am sorry you have it. My guess is that you need to wear an effective filter to do woodworking. Better...

The youtuber I couldn't remember last night is "half inch shy". This should be a link to his "pimped out Sawstop" with many of the changes related...

I brought my sawstop home in a utility trailer behind my convertible. I slid it out onto a mobile base I made for it. When the base needed...

It deepens on what you want it to look like. My shed door is falling apart (partly due to my neglect) so I face this same decision before too long. ...

There is a guy on youtube, I mostly look at his site for Festool tips, particularly domino tips. Goes by half something or other, can't remember the...

I have my PCS hooked to a 2hp HF DC which I think it adequate. The saw port is only 4 inch and hooks by flex hose to a shute around the blade. The...

I recently bought a Klein and it was at least close to your target price but no pins. Seems to work.

I'm glad you only got a small nick. My sawstop saved me loss of at least a good part of the middle finger on my left hand in 2020. First cut on a...

I would buy a track saw for what you describe. Big things are easier to cut on a track saw than a table saw. I have and use both. My table saw is...

I use only 120V power in my shop. My DC is the HF "2hp" unit on its own 20 amp circuit. I run 5 inch metal snap lock pipe to the table saw, CMS,...

Oneida rates the XL super dust deputy to handle a 3-5hp dc. So I think it can handle more power. But you are decreasing it's separation...

I do not know the size but I did run a propane line from my tankless water heater to my fireplace and my bbq grill. I used black iron pipe for the...

I use a little Rigid Vac, I think it has a 4 gallon capacity, with a big motor. I don't really remember the current but it was over 10amp and within...

Another tip I got off an Izzy Swan youtube. He tried a Wen track saw which he generally liked but when he joined the tracks, it was hard to get them...

John, I bought a JWBS14-SFX in 2020 and I like it a lot. I looked on Jet's website for the 14DXPRO and it looks like a nice saw too. The SFX...

Randy, I pretty much agree but I would also say that there is a variety of 14 inch bandsaws. My biggest blade is a 3/4 which I have not tried yet...

I looked at his current big bandsaw build and I think he is a bit light. It looks to me like he laminated 7 boards about 3/4 thick for a "b" of 5.25...

Well you are right that I had a math mistake, actually it looks like two. When I calculated the I for the column of my saw, I subtracted the I for...

I was a bit bored so when I went out to the garage to put on another coat of poly I measured the outside of the frame of my Jet. It is two tubes of...