Michael J Evans
Contributor

In my inexperienced novice opinion, I would worry less about the small tiny gaps between each lamination and more about getting everything nicely...

Yes I am realizing this more and more, now that I have more machinery than just my table saw. I got a little 3/4 jet dust collector on the cheap when...

I'm likely totally misunderstanding, but if you have it on a a pallet and can't get it to lift evenly, is it possible to get a couple of those 4...

It won't destroy the machine but it will eat up cutters. A chip collector would be handy. I used Engravlab on my rotary engraver. Sandcarving is...

I think you're going to have a tough time getting a satisfactory result on bricks with that machine. But that may be the least of your problems. I...

This is so true and my employee do it. Went to use a saw in our shop today and it just wasn't cutting. Taking wayyy to long. I joking said...

Whatever you come up with make sure the drawers securely lock in place. I watched a contractor load a full pallet of flooring into his slide out...

Hi prashun, Looking at the costs of t-slots, hardware, wood, inserts, misc, it's easy to get up to the price of the little bench top tables real...

Thanks Earl

Earl do you think this base is worth the $55 dollars?

Jim my first thought was to put the router in my table saw extension table. I would need to beef up the extension table somehow first. I have a...

Earl, Thank you for the detailed reply. I think I will eventually by the PC router base plate adapter, since I already have that style of bushing....

Check the dimensions to make sure it will go through your door.

Hi everyone. Hope all doing well. Just wanted to update this thread. I received some zero slop adjustable miter bars and made a new jig to hold...

I may do that Monday just to get their thoughts before doing anything. Thanks.

Hi Glen the UHMW strip is only maybe 2" wide x approx 1/2" think x 43" long. I am afraid even just slight uneven pressure would cause more damage...

I think this will be my first plan of attack. I can remove the screws holding the UHMW on and try sticking sheets of paper behind it to see. Thanks

Wow good to know. I think your right and I'll just make a hardwood face. I have some nice sapele and other tropical pieces that I could use.

Hi Lee No burning, but I was only cutting 1/2 spruce.i did noticed crosshatching / teeth marks on the back end of the board. I did just do the...

There are three removable Phillips in the face. It would have to be machined down removed from the extrusion

I didn't even know people worried about stains on their baking sheets.... Now I'm embrassed to admit our are black and have been for many many years....

Ivan I doubt that it makes any difference in your application but DNA and 70% isopropyl are distinctly different animals.

I've never tried foam but when my laminated plastic edges are sticky and black I use DNA along the edges. That might be more difficult with foam but...

My thanks, respect, and best wishes to all who served.

Ended up getting the bear crawl all wheel swivel base with extension. The all wheel swivel is very nice and mobile base seems very well constructed....

Same here Tom. Sad part is my dad knows damn near just about every handy skill. My lesson in driving a clutch "here's the keys don't burn up...

I started with a miter and table saw. I could do without the miter but not the table saw. In your case you've been able to make do without so...

Coxreels has a soft / slow close rewind reel. John is right and some of those reels will really suck the hose back in with some force. I believe...