Michael J Evans
Contributor

Cameron I wasn't following in your original post. But that is a freaking brilliant idea to just have the large face frame but not make boxes for the...

last year I gave my 3 year old great grandson a SAK like mine. There are too many people who have the idea that pocket knives aren't good for kids. ...

Hi Cameron Thanks for the detailed reply. See below in red.

Excellent article Thomas. Thanks for finding that!

Lol thanks Brian, I honestly felt a certain type of way just admitting being scared off by the project. I was going to build the boxes out of...

Lee Thanks for all the feedback. Your right the hardest cut is always the first one. I feel like I am watching a newbie at work. They are always...

I've carried a pocket knife for nearly 80 years. Some of you may remember when kids boots came with a pocketknife. Anyway, for the last 40 years or...

Just wanted to say thanks for all the advice and I didn't blow up the house. We had a sweltering 60 deg day last Saturday. I opened up the garage and...

FYI Several years ago Epilog had a serious X axis motor issue which they dragged their feet on resolving. My recollection was that they had used a...

Kev Have you tried Main Trophy? https://maintrophysupply.com/

Have you experimented with the hertz setting in your materials sheet? A higher number will produce a smoother cut. The software automatically...

Ahh gotcha. Thanks for clarifying.

Thank you Dave. I'll give that a try. Paul, thank you. I'm trying to avoid that but if necessary, we will add a drawer for the chessmen. But...

Dave I'd be happy to send it to you but you need to be a contributor to send pm's. Since you have a 360 I'm sure your machine was pre-adjusted at...

I know zero about RD Works but if that happened on my laser I would look at the colors I used for fill and outline. Most domestic machines require...

I would try newer version of Job Control. I'd be surprised if you found a version that old as there wouldn't be much need to keep it. The latest...

Good to know. Thanks Andrew

Hi John Here in the PNW it hasn't been real warm. Maybe usually 40s-60s this time year.

Dave / Larry Thanks. How long would you leave the door open for ventilation? Like just whole applying, 3-4 hrs afterwards,etc?

Bill Great idea. I just have no idea how I'd accurately clamp anything in that tiny space. Likely I'll just have to do lots of trial and error to...

Hi Ron I think your right. Just get it very close then bump fence from there. Only thing is I think I'd rather have the cursor cut a little fat then...

Probably a dumb and OT question but, I couldn't help but look at the rest of the machines and seen the 4 sided planer moulders. I feel like the...

If you have Helix drivers and firmware loaded you should be able to check the machine using a usb cable on your pc. With that you can check the x-y...

Glen There is a white paper on adjusting air assist. You can try to get it from Trotec or if you'll pm your email I'll send it to you.