Jeff Ramsey
Contributor

That's interesting considering it's sold as paint thinner and many of us also use it for cleaning because it doesn't leave a film behind like...

The only two options I would entertain for this would be to either rewire the circuit properly for four wire 120/240v operation per code or replace...

Clear the existing sawmillcreek.org cookie(s), close the browser completely (and consider rebooting the machine and then start the browser followed...

Yes, initial cost is high, but after a few years, things will balance out a bit more and the quality of the veggies takes the rest of the pain away!

That extra mass isn't hurting you in the "runs smoother" department, for sure. 'Glad it's working out!

Construction lumber, in general, is coming down in price across the board, but some of the anomalies we might see out there in the home centers and...

That may not be true for the portables that the OP is considering, at least yet. Cordless tools have very much gone that route, however. ---- ...

No experience, although I actually touched one years ago. They were a decent dedicated resaw machine back in the day.

Bryan, no, I'm not up for doing my own spray foam other than corner sealing. I'll get some more current quotes, however, once I'm closer to build....

Steve, I don't disagree with TWW's logic on that...a whole bunch of cross cutting really is at 90º in my experience, so a fixed fixture, as it were,...

I've been thinking about the same thing as I visited this thread each day to see what folks have been saying. I suspect that a digital scale would be...

As decent and capable that Mach4 is, Acorn is very much next level, IMHO. It's nice that the option is there to folks to do an upgrade like that.

Yea, it's not something that might be immediately intuitive, but scoring capability can sometimes be a "problem solver" and I'm looking forward to...

"Old stock" can do that sometimes, even though Zinsser products do seem to have a reasonable shelf life. 'Hope the uber-thin coating resolved things...

Mike, while I don't use scoring the majority of the time with solid stock, I have employed it occasionally for something that it was critical for me...

That was likely a very good choice for this application...designed for the task for sure.

I"ve only had a cabinet saw in my (temporary shop) for about a year right now and I had to nearly immediately make up a crosscut sled in order to...

Stan, you probably could use metal, but he glue choice would be what it is for metal to wood in a high stress situation and it would be hard to "make...

Making that movable should be, um..."fun"...I'm thinking you need a free-standing stand with casters and need to use quick connect ducting at least...

You "should" be able to clean the product off with multiple applications of mineral spirits/naphtha and constantly clean/new rags. It takes patience,...

What Johnathan said is how I've handled this in the past. If an outfeed solution is "free standing" the way around having a gap is to overhang the...

To do a machined chamfer like you describe, it's likely best to do it prior to assembly so you can take advantage of a fence. At this point, I'd do...

It may be that it's currently so dry in many places that rain exciting the radar may not actually be reaching the ground. I've been having the same...

Yes, I agree. Once your custom machine is "in the wild", please come back with a thread that gives us the fifty cent tour!

One must choose a scoring blade that matches the kerf width of the main blade or a scoring blade that is adjustable width. IMHO, they must be...