Jeff Ramsey
Contributor

I've never found the need for a dedicated cross-cut blade given just how well a properly sharpened Forrest WW-II cross-cuts...I'm talking "shiny" end...

I don't disagree that it's not the best design, but it will serve for the moment. I'm not worried about the blades exposed on the bottom row,...

I cannot even tell you how many of those things and their cousins I sold back in the 1980s over a 7 year period...

Which I'm effectively already using with MacOS to run Windows 11. (Parallels) Adding Linux to the mix doesn't get me anything. :)

Folks....stay away from the politics, please. Jim Forum Moderator

I sand the edges as fine as I can and use spackle/joint compound to fill and seal edges. Sealing with wax free shellac can also help. In both cases,...

Waterborne finishes dry quickly compared to oil based finishes and that makes brushing them a little trickier. You cannot "work" the finish. It's not...

There are a lot of variables here, including "what kind of heat pump design", outside temperature factors, size of the structure, insulation, use...

Linux would be useless for me since any such computer I'd consider would be specifically to run a Windows-only CAD/CAM application should I begin to...

Thanks for that feedback on the sprung clamps, Paul. I will likely still try them, but only buy two for obvious reasons. I may just get more of the...

Pilot holes for the screws that would hold the hardware in place were drilled and the screws temporarily installed And then there was a test...

Like with the small plane till, I used inexpensive shelf brackets to create the connection between the chisel rack and the OmniWall panels. Because...

Suggest you reach out to Sam Blasco for advice on that since it's a detail that I suspect few have done anything with.

Something is amiss here...I was never asked about additional products like Office 365 while doing the upgrade to Win11, but it's true they have...

That's not true. The hiring is over ten years and largely replaced those who have left or will leave and/or brings staffing back to where it's...

I only got those Bandy clamps recently when I visited the new Rockler store in NJ after it opened late last year. I have used them once and really...

Bill, Win11 has been out for a long time now...any bugs are "normal" bugs at this point. That said, the changes in the UI are both good and bad. Good...

Ironically, Robert and I were texting back and forth at about the same time both tills were works in progress. :D If he hadn't moved a couple...

Rollie...you brought a "bad memory" with the mention of Pushmatic! That's what was in the house at our old property when we moved in. Those things...

Those are beautiful doors, mreza!!!

Alan, they are heavy for sure. And honestly, I don't have enough 30" clamps. :) Or enough smaller quick clamps. :D Or...or...or...

Yes, you can sneak up on the "right" sheen that way. But again, the operative word is "sneak" up on it so don't avoid the testing thing even if it...

The bin on the G700 is indeed smaller than many of us are used to with the cyclones we previously ran, but it's easy to deal with...I had to empty...

The "Green" is just the heartwood...and it turns brown with exposure to UV in a day or three.

Yes, you can combine sheens. Alternatively, you can get flatting agents and just use the gloss; do the first coat with gloss and your second coat...

Good quality collets are definitely an uplifting enhancement! I'm glad you chose to dispose of those that got dropped, too...that's kinda a best...

Looks great, Robert!!!!