I typically use biscuits for what you’re describing and find there to be at least as much glue surface and easier assembly because of the little bit...
I like the original, all Red, wooden handled Bessey parallel clamps vs the newer plastic black and red ones. I swear that the bar deflects less under...
Yes, in my experience, the practical difference between a 2mm and 3mm stroke is not enough and the 5mm stroke is the way to go on the 1st, Lower grit...
Do not use a glass cutting board. This will ruin the edges on your knives. I can’t understand initially who said this was a good idea for a *cutting*...
I would imagine the one Mike has is likely priced very similar to the Felder tables, but would love to hear otherwise if that’s not the case. I love...
Neither of mine drop down overnight and one of them is a “cheap“ cart from Northern Tool. My other one is a electric over hydraulic 2200 lb Bishamon...
Thanks Ralph. I’m familiar with Kyle and his content. I haven’t seen any situation in his builds that is what I have, but maybe I’ll go back and look...
I currently have both ETS EC 150-3 and RO 150. Rotex for rough work or sanding up to ~120 grit. ETS EC 150 for everything 120/150 and above. The ETS...
I use Kreg Automax on my saw as well. Where you need clamps is straight line ripping edges of lumber. I have the factory ripping shoe for my saw and...
Find latest posts
View Articles
View Blog Entries