Jim Fox
Contributor

Week of small things for me. Finished up some floating lamps, concrete and walnut. Not sure why I did them, but they are done. Built a frame for a...

Marc, I made another post of my setup that I just completed, well minus a brace to stop the swaying. ...

Me as well +2

David that is not nearly big enough for a whiskey problem, I mean cabinet! I think the one I helped a buddy build is 2 cabinets at around 3'x5'

I just ordered parts for this setup from McMaster-Carr, minus the yellowish orange handles. Gonna try those 4 with regular bolts first, way cheaper...

Not WW related, but very accomplished. Lots of work put in on a sledding hill with my daughters (21 and 24). Friday night we started and we made it...

Machine wise, the oldest are my Shopfox Cabinet Saw and Dust Collector, early 2000's. Tool wise, it's a 1931-1932 Stanley Bailey No 3 I just...

I like this method too. It is exactly how I did the top of my miter bench, but mine isn't screwed down. Other than one corner on the far end...

This is what I will be doing as well. Been using the original Shark Guard for years. Just got to get the nesting parts to build the overhead...

I've gone from the Craftsman little table top router stand and router, to a Freud in the extension wing to a Norm'ish cabinet build. I agree with...

I get little splinters every time I run Baltic Birch, even with a fresh sharpened Freud blade. If I don't have a new splinter or abrasion on at...

Another one that might be worth looking into is the Harvey MG-36. Not cheap! Been eyeing it myself recently and I have the 1000SE already. Been...

I replace the first filter quite regularly. Both bag filters, even the older unit, were not to dirty. You can see dust sneaking around the bag...

I installed a 3/8" foam strip on the top where the gap was. Now it's a wedge fit. We'll see if it helps any. It's like they need to modify the...

I envy you guys that can listen to audiobooks or podcasts. I wish I could! I mean I can, but 1 sentence later I already forgot what they said. ...

Oh I think they definitely help too. Filters are always getting dirty. I think I might try and replace/add some rubber gasket behind/around the bag...

And it's only going to get worse!

Cary, how do you like the Byrd head in there? Been thinking of upgrading mine. Does yours have the belt slap on Startup?

Depends on my mood. It'll either be from Pandora, Spotify or Amazon Music. Lately it's been anything from Classic Rock to Outlaw Country to Old...

Yeah it's hard to tell. The base is definitely different. Centered fence on the 1860. I have the older 1741 before they put the Helical in it that...

He doesn't go in to much detail about building it, but he makes some upgrades to his current one in the video below and briefly discusses why he uses...

Funny, I've just been hemming and hawing over them for the past month. Bought the plans a couple weeks ago. Now that I just finished a couple other...

Colson's with their Total Locks are awesome casters. Easy to lock and unlock. Way easier to unlock than the little top tabs some of them give you. ...

Really nice looking desk so far Paul! I managed to get some brackets made for the new rack storage area. Just a relocation project and better...

The router is no longer available. Thanks for the interest

Hopefully the OP doesn't mind me asking a side question to this..... So regarding the sleds...............Homemade, Incra 5000 or both? I know...