Curt Harms
Contributor

I have a 3 hp G1023 table saw and Jet JJP-12 3 hp J/P along with a "2 hp" dust collector on a 30 amp 240 volt circuit. I've never tried all 3 at the...

Re accessing SMART data. There are people more knowledgeable than me about this stuff but smartctl run from a live USB is fairly informative. I don't...

You could try Super Cut. I have a couple of their Premium Gold blades which seem to have good blade life. Don't confuse their 'carbide' claims with...

There at least used to be two styles of threaded inserts. One had two slots in the top and used a large straight screw driver. Another had a hex...

I recall reading that Steel City machines were not necessarily Chi-wanese standard. I would not be confident in a Grizzly or Jet table saw top...